Symmetricom SSU-2000 Technical Reference

Chapter 2 TL1 Reference
Retrieve Japan Sine Output Parameters
80 SSU-2000 Technical Reference 12713020-003-2 Revision F.01 – January 2007
Line 3 contains:
 aid = module access identifier
 squelch# = threshold value [0 | 1 – 16] (where 0 = disabled). If the reference
clock PQL exceeds this value, then the output is turned off. # = port number [1 –
20]
Related Commands
Set Japan Sine Output Parameters, on page 154

Symmetricom SSU-2000 Specifications

General

Brand	Symmetricom
Model	SSU-2000
Category	Power Supply
Language	English