Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-43
116-719
<XPIF Parameter Cancelled>
Cause:
Due to conflict among multiple print instructions,
print instructions are ignored.
FIP 1. 320
116-721
Memory Full
Press Ok Button
Error 116-721
Press Ok Button
<Collate Full>
Cause:
Unable to collate due to insufficient memory.
FIP 1. 321
117-321
Controller Error
Power Off/On
Error 117-321
Power Off/On
<Device Memory Error >
Cause:
SD CARD Type Invalid.
FIP 1. 327
117-338
Memory Detected
Power Off/On
<Enable Device Memory Error >
Cause:
Invalid, although SD CARD was detected.
FIP 1. 327
118-311
Google Cloud Print
Software Error
Error 118-311
Power Off/On
<Google Cloud Print Software Error>
Cause:
A critical internal error has occurred.
FIP 1. 336
142-700
Over Heating
Run Half-speed
<IOT Over Heat Forced Half Speed>
Cause:
Half-speed operation was forced due to abnor-
mally high temperature inside the IOT.
FIP 1. 385
193-700
Non-Xerox Toner
<Custom Toner Mode>
Cause:
The printer is in custom toner mode.
FIP 1. 386
Status
Code
(3610)
LCD Message Name/Description of Error FIP