Xerox Phaser 3610 - Specifications

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-65
024-911
Paper Size Mismatch 024-911
Load paper in Tray 2.
XXX
YYY
(XXX: Paper Size
YYY: Paper Type)
<Tray 2 Paper Size Mismatch>
Cause:
The size of paper in the Tray 2 does
not match the specified print size.
FIP 1. 113
024-912
Paper Size Mismatch 024-912
Load paper in Tray 3.
XXX
YYY
(XXX: Paper Size
YYY: Paper Type)
<Tray 3 Paper Size Mismatch>
Cause:
The size of paper in the Tray 3 does
not match the specified print size.
FIP 1. 113
024-913
Paper Size Mismatch 024-913
Load paper in Tray 4.
XXX
YYY
(XXX: Paper Size
YYY: Paper Type)
<Tray 4 Paper Size Mismatch>
Cause:
The size of paper in the Tray 4 does
not match the specified print size.
FIP 1. 113
024-920
Output Tray Full
Remove Paper from Output
Tray.
<IOT Standard Stacker Full>
Cause:
Output Tray Full is Detected.
FIP 1. 114
024-958
Paper Size Mismatch 024-958
Load paper in NNN.
XXX
YYY
(NNN: Manual Feed
XXX: Paper Size
YYY: Paper Type)
<MSI Paper Size Mismatch>
Cause:
The size of paper in the MSI does not
match the specified print size.
FIP 1.115
Status
Code
(3615)
LCD Display Name/Description of Error FIP