Xerox Phaser 3610 - Page 163

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-105
062-321
Scanner Error 062-321
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Scanner Error>
Cause:
Unexecutable error. (carriage is at the
locked position, etc.)
FIP 1. 270
062-322
Scanner Error 062-322
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Scanner Error>
Cause:
Parameter error.
FIP 1. 270
062-360
Scanner Home Position Sensor
Error 062-360
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<HP Sensor Error>
Cause:
Carriage home position error.
FIP 1. 270
062-371
Scanner Lamp Error 062-371
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Scanner Lamp Error>
Cause:
IIT failure Lamp error.
FIP 1. 270
062-393
Scanner Error 062-393
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<CCD ASIC Error>
Cause:
CCD ASIC communication error.
FIP 1. 270
062-790
Copy Limit Error 062-790
Last sheet not copied.
*Caution screen with Close
button
<Copy Limit>
Cause:
Copy limit.
FIP 1. 272
071-100 -
<IOT Tray1 Misfeed Jam>
Cause:
After the Tray 1 Feed Clutch turned
ON, the Regi. Sensor did not turn ON
within the specified time.
FIP 1. 273
Status
Code
(3615)
LCD Display Name/Description of Error FIP