Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual2-104
062-277
Scanner Error 062-277
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Scanner Error>
Cause:
IIT internal communication error.
FIP 1. 270
062-311
Scanner Error 062-311
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Scanner Error>
Cause:
IIT failure initialization error.
FIP 1. 270
062-316
Scanner Error 062-316
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<DADF Motor Fail>
Cause:
Detect DADF Motor Fail.
FIP 1. 271
062-317
Scanner Error 062-317
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<IIT Video overrun>
Cause:
Interference buffer full was detected
at the time of DADF scan.
FIP 1. 270
062-318
Scanner Error 062-318
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<IIT scan timing error>
Cause:
A Scan setup did not meet the dead-
line into Page Gap.
FIP 1. 270
062-319
Scanner Error 062-319
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<PLL lock timeout error>
Cause:
A PLL lock was not carried out before
1stScan start, but the lock has sepa-
rated during continuation.
FIP 1. 270
062-320
Scanner Error 062-320
Power Off/On the Printer.
If this failure occurs again,
please contact customer sup-
port.
<Scanner Error>
Cause:
Scanning error.
FIP 1. 270
Status
Code
(3615)
LCD Display Name/Description of Error FIP
To Next Page
Loading...
