Specifications
Phaser 3610, WorkCentre 3615 Service Manual 8-31
Document Size Detection
The device has Legal size sensor.
Feeding Method
• Feeding order: Top to bottom feed
• Document setting: Place document face up
Retention Angle / Open Angle of Platen Cover with DADF
• Maximum open angle:70 deg or Less
• Platen cover can be retained at any angle:15 +/- 5 through 65 +/- 5 deg
• Platen cover self-weight drop angle:15 +/- 5 deg or less
Document Setting
Center registration
Mixed-size Document
This function is not supported.
Document Tray Capacity
• 60 sheets of standard document (about 80gsm), or document stack height is 0.3 in. (8 mm)
or less.
• Document shall not be creased/folded/swollen, etc.
Output Document Stacking Reliability for Acceptable Document and Special Document
• The following conditions shall be met for up to the maximum capacity of the document
setting tray.
• Output paper shall stack in the right order and shall not drop from the output tray.
Document Jam Recovery Procedure
Open the DADF left cover and pull out the document. If you cannot pull out the jammed document, lift
up the lever that you can see at the front side when the left cover is opened to release the nip of the
document pull-in part, and then remove the document.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
