Xerox Phaser 3610

Specifications
Phaser 3610, WorkCentre 3615 Service Manual8-32
FAX Specifications (3615)
FAX Communication
Communication Mode
The supported communication modes and priorities are as follows:
• Priority 1: ITU-T Super G3
•Priority 2: ITU-T G3 ECM
•Priority 3: ITU-T G3
ITU: International Telecommunication Union
ITU-T: ITU Telecommunication Standardization Sector
ECM: Error Correction Mode
Pixel transmission density
Pixel transmission density on the supported transmission path is as follows:
• R16 x 15.4 line/mm
• R8 x 15.4 line/mm
• R8 x 7.7 line/mm
• R8 x 3.85 line/mm
• 400 x 400 pixel/25.4mm (PHOTO - Grayscale)
• 300 x 300 pixel/25.4mm (SUPERFINE)
• 200 x 200 pixel/25.4mm (FINE)
• 200 x 100 pixel/25.4mm (STANDARD)
Modem Signal Processing
The following communication standards are supported:
• V.34 (33.6 /31.2 /28.8 /26.4 /24 /21.6 /19.2 /16.8 /14.4 /12 /9.6 /7.2 /4.8 /2.4kbps)
• V.17 (14.4 /12 /9.6 /7.2kbps)
• V.29 (9.6 /7.2kbps)
• V.27ter (4.8 /2.4kbps)
Halftone/Compression Method
1bit, JBIG, MMR, MR, MH encoding.
Communication Control Procedure
Complies with ITU-T recommendation T.30.