Xerox Phaser 3610

Troubleshooting
Phaser 3610, WorkCentre 3615 Service Manual 2-29
024-913
Load Tray 4
XXX
Load Tray 4
YYY
(XXX:Paper Size
YYY:Paper Type)
<Tray 4 Paper Size Mismatch>
Cause:
The size of paper in the Tray 4 does not match the
specified print size.
FIP 1. 113
024-920
Output Tray Full
Remove Paper
<IOT Standard Stacker Full>
Cause:
Output Tray Full is Detected.
FIP 1. 114
024-958
Load NNN
XXX
Load NNN
YYY
(NNN:Manual Feed
XXX:Paper Size
YYY:Paper Type)
<MSI Paper Size Mismatch>
Cause:
The size of paper in the MSI does not match the
specified print size.
FIP 1.115
024-959
Load Tray 1
XXX
Load Tray 1
YYY
(XXX:Paper Size
YYY:Paper Type)
<Tray 1 No Suitable Paper>
Cause:
• Displayed when any of the following errors
occurs and tray setting needs to be changed
after paper is loaded.
• When paper source auto selection is selected,
paper sizes of all existing trays do not match.
(All Tray Size Mismatch)
• When a tray is specified, no paper is loaded
in the specified tray. (Specified Tray Empty)
• When a tray is specified, paper size loaded in
the specified tray does not match. (Specified
Tray Size Mismatch)
• When Substitute Tray is Off and a paper type
is specified, there is no tray loading the
specified paper type. (Specified Tray Media
Mismatch)
FIP 1. 116
Status
Code
(3610)
LCD Message Name/Description of Error FIP