HCUBPTOC Input signals
Table 1079: HCUBPTOC Input signals
Name Type Default Description
I3P1 SIGNAL - Three-phase currents
1
I3P2 SIGNAL - Three-phase currents
2
BLOCK BOOLEAN 0=False Block signal for acti-
vating the blocking
mode
HCUBPTOC Output signals
Table 1080: HCUBPTOC Output signals
Name Type Description
OPERATE BOOLEAN Operate
START BOOLEAN Start
ALARM BOOLEAN Alarm
4.12.3.8 HCUBPTOC Settings
Table 1081: HCUBPTOC Group settings (Basic)
Parameter
Values (Range) Unit Step Default Description
Start value 0.01...1.00 xIn 0.01 0.10 Start value
Alarm start value 0.01...1.00 xIn 0.01 0.05 Alarm start value
Time multiplier 0.05...15.00 0.01 1.00 Time multiplier
in IEC/ANSI IDMT
curves
Operating curve
type
1=ANSI Ext. inv.
2=ANSI Very inv.
3=ANSI Norm. inv.
4=ANSI Mod. inv.
5=ANSI Def. Time
6=L.T.E. inv.
7=L.T.V. inv.
8=L.T. inv.
9=IEC Norm. inv.
10=IEC Very inv.
11=IEC inv.
12=IEC Ext. inv.
13=IEC S.T. inv.
14=IEC L.T. inv.
15=IEC Def. Time
17=Programmable
18=RI type
15=IEC Def. Time Selection of time
delay curve type
Table continues on the next page
1MRS759142 F Protection functions
REX640
Technical Manual
1139
To Next Page
Loading...
