CSMSQI Input signals
Table 1415: CSMSQI Input signals
Name Type Default Description
I3P SIGNAL - Three-phase currents
CSMSQI Output signals
Table 1416: CSMSQI Output signals
Name Type Description
I2_HIGH_AL BOOLEAN Negative sequence high
alarm
I2_HIGH_WARN BOOLEAN Negative sequence high
warning
I1_HIGH_AL BOOLEAN Positive sequence high alarm
I1_HIGH_WARN BOOLEAN Positive sequence high warn-
ing
I1_LOW_WARN BOOLEAN Positive sequence low warn-
ing
I1_LOW_AL BOOLEAN Positive sequence low alarm
I0_HIGH_AL BOOLEAN Zero sequence high alarm
I0_HIGH_WARN BOOLEAN Zero sequence high warning
I2_INST FLOAT32 Negative sequence current
amplitude, instantaneous val-
ue (A)
I1_INST FLOAT32 Positive sequence current
amplitude, instantaneous val-
ue (A)
I0_INST FLOAT32 Zero sequence current ampli-
tude, instantaneous value (A)
8.1.11.6 CSMSQI Settings
Table 1417: CSMSQI Non group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Operation
1=on
1=on Operation Off / On
Table continues on the next page
Measurement functions 1MRS759142 F
1472 REX640
Technical Manual
To Next Page
Loading...
