ABB RELION REX640 - 4.2.4.10 EFPADM Monitored data

Parameter Values (Range) Unit Step Default Description
Conductance for-
ward
-500.00...500.00 mS 0.01 1.00 Conductance
threshold in for-
ward direction
Conductance re-
verse
-500.00...500.00 mS 0.01 -1.00 Conductance
threshold in reverse
direction
Susceptance for-
ward
-500.00...500.00 mS 0.01 1.00 Susceptance
threshold in for-
ward direction
Susceptance re-
verse
-500.00...500.00 mS 0.01 -1.00 Susceptance
threshold in reverse
direction
Table 570: EFPADM Group settings (Advanced)
Parameter Values (Range) Unit Step Default Description
Conductance tilt
Ang
-30...30 deg 1 0 Tilt angle of con-
ductance boundary
line
Susceptance tilt
Ang
-30...30 deg 1 0 Tilt angle of sus-
ceptance boundary
line
Table 571: EFPADM Non group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Operation
1=on
5=off
1=on Operation Off / On
Table 572: EFPADM Non group settings (Advanced)
Parameter
Values (Range) Unit Step Default Description
Admittance Clc
mode
1=Normal
2=Delta
1=Normal Admittance calcula-
tion mode
Reset delay time 0...60000 ms 1 20 Reset delay time
Pol reversal
0=False
1=True
0=False Rotate polarizing
quantity
Min operate current 0.01...1.00 xIn 0.01 0.01 Minimum operating
current
Min operate volt-
age
0.01...1.00 xUn 0.01 0.01 Minimum operating
voltage
4.2.4.10 EFPADM Monitored data
Table 573: EFPADM Monitored data
Name
Type Values (Range) Unit Description
START_DUR FLOAT32 0.00...100.00 % Ratio of start time / op-
erate time
COND_RES FLOAT32 -1000.00...1000.00 mS Real part of calculated
neutral admittance
SUS_RES FLOAT32 -1000.00...1000.00 mS Imaginary part of cal-
culated neutral admit-
tance
EFPADM Enum
1=on
2=blocked
3=test
4=test/blocked
Status
Protection functions 1MRS759142 F
514 REX640
Technical Manual