8.4.1 Function block
Figure 819: Function block
8.4.2 Signals
The input signal tables for B1RBDR and B2RBDR are similar except for the channel
numbers.
• B1RBDR, C1...C32
• B2RBDR, C33...C64
Table 1446: B1RBDR Input signals
Name Type Default Description
C1 BOOLEAN 0=False Signal for input 1
Values are the same for each input signal. The channel numbers are
shown after the parameter name in the HMI and PCM600.
8.4.3 Settings
Setting tables for all B1RBDR and B2RBDR channels are similar except for the
channel numbers.
Table 1447: B1RBDR Non group general settings (basic) Parameter Values (Range) Unit Step
Parameter Values (Range) Unit Step Default Description
Operation
1=on 5=off
Binary channel on /
off
Table continues on the next page
1MRS759142 F Measurement functions
REX640
Technical Manual
1497
To Next Page
Loading...
