ABB RELION REX640 - 3.18.7 Received GOOSE measured value (phasor) information GOOSERCV_CMV; 3.18.7.1 Function block; 3.18.7.2 Functionality; 3.18.7.3 Signals

3.18.7 Received GOOSE measured value (phasor) information
GOOSERCV_CMV
3.18.7.1 Function block
Figure 100: Function block
3.18.7.2 Functionality
The received GOOSE measured value (phasor) information function
GOOSERCV_CMV is used to connect GOOSE measured value inputs to the
application. The MAG_IN(amplitude) and ANG_IN (angle) inputs are defined in the
GOOSE configuration (PCM600).
The MAG output passes the received GOOSE amplitude and ANG the received angle
value for the application.
3.18.7.3 Signals
Table 151: GOOSERCV_CMV Input signals
Name Type Default Description
MAG_IN FLOAT32 0 Input signal (ampli-
tude)
ANG_IN FLOAT32 0 Input signal (angle)
Table 152: GOOSERCV_CMV Output signals
Name Type Description
MAG FLOAT32 Output signal (amplitude)
ANG FLOAT32 Output signal (angle)
VALID BOOLEAN Output signal
Basic functions 1MRS759142 F
212 REX640
Technical Manual