ABB RELION REX640 - 3.20 Configurable logic blocks; 3.20.1 Minimum pulse timer; 3.20.1.1 Minimum pulse timer, two channels TPGAPC (ANSI 62 TP); Identification

Table 194: T_I8_TO_I32 Output signals
Name Type Description
INT32_OUT INT32 Integer output value
3.20 Configurable logic blocks
3.20.1 Minimum pulse timer
3.20.1.1 Minimum pulse timer, two channels TPGAPC (ANSI 62TP)
Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Minimum pulse timer, two channels TPGAPC TP 62TP
Function block
Figure 120: Function block
Functionality
The minimum pulse timer, two channels, function TPGAPC contains two
independent timers. The function has a settable pulse length (in milliseconds).
The timers are used for setting the minimum pulse length for example, the signal
outputs. Once the input is activated, the output is set for a specific duration using
the Pulse time setting. Both timers use the same setting parameter.
Figure 121: A = Trip pulse is shorter than Pulse time setting, B = Trip pulse is longer
than Pulse time setting
1MRS759142 F
Basic functions
REX640
Technical Manual
231