ABB RELION REX640 - 4.12.3.9 HCUBPTOC Monitored data

Parameter Values (Range) Unit Step Default Description
19=RD type
Operate delay time 40...200000 ms 10 5000 Operate delay time
Alarm delay time 40...200000 ms 10 200000 Alarm delay time
Table 1082: HCUBPTOC Group settings (Advanced)
Parameter Values (Range) Unit Step Default Description
Natural Comp Ena
PhA
0=False
1=True
0=False Enable natural un-
balance compensa-
tion PhA
Natural Comp Ena
PhB
0=False
1=True
0=False Enable natural un-
balance compensa-
tion PhB
Natural Comp Ena
PhC
0=False
1=True
0=False Enable natural un-
balance compensa-
tion PhC
Table 1083: HCUBPTOC Non group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Operation
1=on
5=off
1=on Operation Off / On
Curve parameter A 0.00860...120.0000
0
0.00001 28.20000 Parameter A for
customer program-
mable curve
Curve parameter B 0.00000...0.71200 0.00001 0.12170 Parameter B for
customer program-
mable curve
Curve parameter C 0.02...2.00 0.01 2.00 Parameter C for
customer program-
mable curve
Curve parameter E 0.0...1.0 0.1 1.0 Parameter E for
customer program-
mable curve
Table 1084: HCUBPTOC Non group settings (Advanced)
Parameter
Values (Range) Unit Step Default Description
Reset delay time 0...60000 ms 1 20 Reset delay time
Minimum operate
time
20...60000 ms 1 20 Minimum operate
time for IDMT
curves
4.12.3.9 HCUBPTOC Monitored data
Table 1085: HCUBPTOC Monitored data
Name
Type Values (Range) Unit Description
START_DUR FLOAT32 0.00...100.00 % Ratio of start time / op-
erate time
I_NAT_AMPL_A FLOAT32 0.00...5.00 xIn Recorded natural unbal-
ance current amplitude
phase A
I_NAT_ANGL_A FLOAT32 -179.00...179.00 deg Recorded natural un-
balance current angle
phase A
I_NAT_AMPL_B FLOAT32 0.00...5.00 xIn Recorded natural unbal-
ance current amplitude
phase B
Table continues on the next page
Protection functions 1MRS759142 F
1140 REX640
Technical Manual