ABB RELION REX640 - Page 1402

7.4.9 RCFD Monitored data
Table 1338: RCFD Monitored data
Name Type Values (Range) Unit Description
SLFCLR_FLT BOOLEAN
0=False
1=True
Self clearing fault de-
tected
SLFCLR_3PH BOOLEAN
0=False
1=True
Three phase self clear-
ing fault detected
STR_DET_A BOOLEAN
0=False
1=True
Detection started
(phase A)
STR_DET_B BOOLEAN
0=False
1=True
Detection started
(phase B)
STR_DET_C BOOLEAN
0=False
1=True
Detection started
(phase C)
STR_DET_N BOOLEAN
0=False
1=True
Detection started (re-
sidual)
SLFCLR_CNT_A INT32 0...10000 Number of self clearing
fault detected (phase
A)
SLFCLR_CNT_B INT32 0...10000 Number of self clearing
fault detected (phase
B)
SLFCLR_CNT_C INT32 0...10000 Number of self clearing
fault detected (phase
C)
SLFCLR_CNT_N INT32 0...10000 Self clearing fault de-
tected (residual)
SLFCLR_FLT_A BOOLEAN
0=False
1=True
Self clearing fault de-
tected (phase A)
SLFCLR_FLT_B BOOLEAN
0=False
1=True
Self clearing fault de-
tected (phase B)
SLFCLR_FLT_C BOOLEAN
0=False
1=True
Self clearing fault de-
tected (phase C)
SLFCLR_FLT_N BOOLEAN
0=False
1=True
Self clearing fault de-
tected (residual)
ADP_ST_VAL_A FLOAT32 0.00...40.00 xIn Used adaptive start val-
ue (phase A)
ADP_ST_VAL_B FLOAT32 0.00...40.00 xIn Used adaptive start val-
ue (phase B)
ADP_ST_VAL_C FLOAT32 0.00...40.00 xIn Used adaptive start val-
ue (phase C)
ADP_ST_VAL_N FLOAT32 0.00...40.00 xIn Used adaptive start val-
ue (residual)
I_CLC_AMPL_A FLOAT32 0.00...40.00 xIn Calculated current mag-
nitude (phase A)
I_CLC_AMPL_B FLOAT32 0.00...40.00 xIn Calculated current mag-
nitude (phase B)
I_CLC_AMPL_C FLOAT32 0.00...40.00 xIn Calculated current mag-
nitude (phase C)
I_CLC_AMPL_N FLOAT32 0.00...40.00 xIn Calculated current mag-
nitude (residual)
RCFD Enum
1=on
2=blocked
Status
Condition monitoring functions 1MRS759142 F
1402 REX640
Technical Manual