Name Type Values (Range) Unit Description
ted object relative to
the operate level
PDNSPTOC1 rat. I2/I1 FLOAT32 0.00...999.99 % PDNSPTOC1 ratio I2/I1
Frequency:1 FLOAT32 0.00...80.00 Hz Frequency (1)
Frequency gradient:1 FLOAT32 -10.00...10.00 Hz/s Frequency gradient (1)
Frequency:2 FLOAT32 0.00...80.00 Hz Frequency (2)
Frequency gradient:2 FLOAT32 -10.00...10.00 Hz/s Frequency gradient (2)
Frequency:3 FLOAT32 0.00...80.00 Hz Frequency (3)
Frequency gradient:3 FLOAT32 -10.00...10.00 Hz/s Frequency gradient (3)
Conductance Yo FLOAT32 -1000.00...1000.00 mS Conductance Yo
Susceptance Yo FLOAT32 -1000.00...1000.00 mS Susceptance Yo
Angle Uo:1 - Io:1 FLOAT32 -180.00...180.00 deg Angle residual voltage
(1) - residual current (1)
Angle U23:1- IL1:1 FLOAT32 -180.00...180.00 deg Angle phase B to phase
C voltage (1) - phase A
current (1)
Angle U31:1 - IL2:1 FLOAT32 -180.00...180.00 deg Angle phase C to phase
A voltage (1) - phase B
current (1)
Angle U12:1 - IL3:1 FLOAT32 -180.00...180.00 deg Angle phase A to phase
B voltage (1) - phase C
current (1)
Angle Uo:2 - Io:2 FLOAT32 -180.00...180.00 deg Angle residual voltage
(2) - residual current (2)
Angle U23:2 - IL1:2 FLOAT32 -180.00...180.00 deg Angle phase B to phase
C voltage (2) - phase A
current (2)
Angle U31:2 - IL2:2 FLOAT32 -180.00...180.00 deg Angle phase C to phase
A voltage (2) - phase B
current (2)
Angle U12:2 - IL3:2 FLOAT32 -180.00...180.00 deg Angle phase A to phase
B voltage (2) - phase C
current (2)
Angle Uo:3 - Io:3 FLOAT32 -180.00...180.00 deg Angle residual voltage
(3) - residual current (3)
Angle U23:3 - IL1:3 FLOAT32 -180.00...180.00 deg Angle phase B to phase
C voltage (3) - phase A
current (3)
Angle U31:3 - IL2:3 FLOAT32 -180.00...180.00 deg Angle phase C to phase
A voltage (3) - phase B
current (3)
Angle U12:3 - IL3:3 FLOAT32 -180.00...180.00 deg Angle phase A to phase
B voltage (3) - phase C
current (3)
The recorded differential and bias currents as well as the maximum
differential and bias currents are provided by LNPLDF1, MPDIF1,
TR2PTDF1 or TR3PTDF1. If the configuration contains more than one of
these functions, only the currents from the function first found on the list
are recorded.
1MRS759142 F Basic functions
REX640
Technical Manual
155
To Next Page
Loading...
