• Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
• Menu paths are presented in bold.
Select Main menu> Settings.
• Parameter names are shown in italics.
The function can be enabled and disabled with the
Operation
setting
• Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
• Input/output messages and monitored data names are shown in Courier font.
When the function starts, the START output is set to TRUE.
• Values of quantities are expressed with a number and an SI unit. The
corresponding imperial units may be given in parentheses.
• This document assumes that the parameter setting visibility is "Advanced".
•
Protective earthing is indicated in figures with the symbol
.
1MRS759142 F
Introduction
REX640
Technical Manual
33
To Next Page
Loading...
