Barco Event Master E2 Series User Manual

R5905948 /12 Event Master Devices 125
Note: Users can now link more than two E2s, or more than
two S3–4Ks in a single system. In this configuration, only
input expansion is supported. Users can select up to 48 SL
inputs for linked E2 systems and 24 SL inputs for linked
S3–4K systems to be marked it as a "Global Input."
Global Input checkboxes are available in the Configuration
page, under the Input and Background tabs for inputs.
How to Auto add all Inputs
The “Auto add all Inputs” button automatically allocates all unassigned input connectors as individual, single
link input configurations. At this moment the incoming signal is acquired and a source file is saved. Input
connectors that are already assigned to an input will not be affected. If the button is pressed, all previously
unassigned input connectors will be automatically assigned. The software by default names inputs as
[ConnectorType] “Input 1, 2, 3….”. Input configuration names can be renamed by double-clicking on the name
and turning the box blue.
EM GUI orientation

Barco Event Master E2 Series Specifications

General

Brand	Barco
Model	Event Master E2 Series
Category	DJ Equipment
Language	English