Barco Event Master E2 Series

R5905948 /12 Event Master Devices 17
Revision
Changes
output cards and split-mode on the quad-channel DisplayPort output card and the
tri-combo output card.
- Added instructions for creating Super Destinations: refer to “Configuration Menu >
Adjustment > Destination Configuration”, page 145 and also to “Programming
Menu”, page 196 and “Programming Menu > Adjustment area > Dest Group
configuration”, page 228.
- Added several linking examples, covering more than two E2, S3–4K, or EX units
and EX units with VPUs: refer to “Configuration Menu > Linking”, page 178.
- Updated the JSON listPresets API and added the 3dControl API: refer to “Event
Master series processor JSON RPC remote control”, page 555 and see
listPresets and 3dControl.
• Changes initiated by new hardware:
- Added description of Tri-Combo Output card: refer to “Tri-Combo Output Card”,
page 75.
08
• Updated contact information: refer to “Contact information”, page 531.
• Added tri-combo input card and tri-combo output card assembly and disassembly
instructions: refer to “Tri-Combo Input and Tri-Combo Output Card Disassembly and
Assembly”, page 391.
09
• Updated the code examples in the JSON RPC remote control section: refer to “Event
Master series processor JSON RPC remote control”, page 555.
10
• Changes initiated by software updates (version 6.0):
- Added Cue functionality, refer to “Cue Menu”, page 240, “Cue Menu > Adjustment
area”, page 241, “Cue Menu > Cue Workspace area”, page 242, and “Cue Menu >
Command resource area”, page 244.
- Added External Device control functionality: refer to “Configuration Menu >
Adjustment > External Devices Configuration”, page 175.
- Added “PGM only” canvas mode: refer to “Configuration Menu > System modifier
area”, page 115.
- Updated the JSON RPC remote control section, refer to “Event Master series
processor JSON RPC remote control”, page 555 and see Use JSON from the
web application, activateCue , and listCues.
• Changes initiated by new hardware:
- Added EC-210 content: refer to “Event Master devices overview”, page 26, “Event
Master controllers features”, page 37, “Initial inspection”, page 44, “Controller
Orientation”, page 327, “Controller Configuration”, page 351, “Controller
Operation”, page 359, “EC-200/EC-210 maintenance actions”, page 381, “EC-200/
EC-210 Maintenance”, page 525, and “”, .
- Added description of Quad HDMI 2.0 input card: refer to “Quad HDMI 2.0 Input
Card”, page 67.
Introduction