Barco Event Master E2 Series User Manual

R5905948 /12 Event Master Devices 227
Layer adjustment panel > Layer Effects adjustment
• Layer Opacity adjusts the level of opaqueness of
the layer. The range is from 0 (100% transparent)
to 100 (100% opaque) in 0.01 increments. The
default setting is 100.
• Strobe: Toggles the strobe function on and off.
When On, adjust the strobe Rate interval (in
frames) to set the duration that the source is
frozen until the next grab.
• Flip: Flips the image within the PIP:
- Off: The image is displayed in its original
orientation.
- H: to flip the image horizontally, along the Y
axis.
- V: Flips the image vertically, along the X axis.
- H/V: Flip the image both horizontally and
vertically, along the X and Y axes.
• Freeze: Enables or disables the freeze action.
• RGB Contrast and Brightness settings are
adjustable within a range of 0% to 200%. The
default setting for all of these properties is 100%.
• Gamma is adjustable within a range of 0.3 to 3.30.
The default setting is 1.0.
• Hue is adjustable within a range of -180 to +180
degrees. The default setting is 0 degrees.
• Saturation is adjustable within a range of 0% to
200%. The default setting is 0%.
• Monochrome: Toggle this button to turn the source
video’s chroma component on and off. When off,
the image is completely monochrome;
• Invert: Toggle this button to turn the color “invert”
function on and off. When on, all image colors are
inverted.
• Reset All: Returns all values to their default
settings.
Note that almost all color correction effects (except
“invert”) work on a keyframe by keyframe basis. This
enables you to morph effects from keyframe to
Keyframe.
EM GUI orientation

Barco Event Master E2 Series Specifications

General

Brand	Barco
Model	Event Master E2 Series
Category	DJ Equipment
Language	English