R5905948 /12 Event Master Devices372
Preset
Image 12-13
Preset refers to Presets stored in Event Master Toolset. See the earlier Chapters for the definition of Presets.
When Preset is pressed it lights its blue LED and opens the syntax entry for Record and Recall of user keys.
Recording of a Preset is done in conjunction with the Save PVW and Save PGM Buttons like below:
• PRESET # ENTER will recall preset #
• PRESET 5 + 11 + 7 ENTER recall these presets in order, 5 being recalled first in a stack on fashion,
information is added but not replaced.
Recording a preset is done via the below syntax:
• SAVE PVW PRESET # ENTER will save the currently selected destination(s) into the selected number. If the
number is already in use, the preset will be overwritten with the current composition on Preview for the
selected destination(s).
• SAVE PVW PRESET ENTER without a # saves next available preset.
The contextual Buttons to the right of the numpad also light up and are populated with functionality that can be
used in the syntax. These are:
Contextual
Button
Display Description
CD1 Lock / Unlock Locks or unlocks the chosen preset(s), using the numpad.
CD2 Renumber Renumber the Selected preset
CD3 Lock All Locks all Presets so that they cannot be deleted or edited.
CD4 Unlock All Unlocks all Presets so that they can be deleted or overwritten.
CD5 Complete/Relative
Toggle
Displays the current type of Preset to be saved. The choice is either
Complete (default) or Relative, and CD5 will display the active choice.
Example:
• PRESET 45 Renumber 55 ENTER will renumber Preset 45 to 55.
Special Function with Modifiers with Preset recall and Record:
• + numpad will increase selection by one.
• - numpad will decrease selection by one.
Cue
Image 12-14
Cue refers to Cues stored in Event Master Toolset. A Cue can be placed into standby, waiting for the operator
to press the Play button to start the Cue. The syntax is CUE + # + ENTER, then press Play to start the Cue.
Time
Image 12-15
Time refers to the timing parameter of the selected Top Functions. This button will allow entering time for
different functions.
Controller Operation
To Next Page
Loading...
Need help?
General
