The Control List
266 Manpack Transceiver 2110 series Reference Manual
Entering a serial command into the startup entry
To enter commands into the startup entry:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to RS232..., then press .
1 Scroll to Startup, then press .
If a serial command has not yet been entered, the List Manager is displayed.
If one or more commands have already been entered, the screen displays the first
command. Hold to open the List Manager.
1 Scroll to Add item, then press .
1 Enter the command, then press .
The new command is stored and the List Manager remains open.
1 If you want to view the command you have stored, press to close the List
Manager.
1 Press until Main Menu is displayed.
1 Switch the transceiver off then on again to activate the command.
Editing a serial command in the startup entry
To edit an existing command in the startup entry:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to RS232..., then press .
1 Scroll to Startup, then press .
1 Scroll to the command you want to edit, then hold .
1 Edit the command, then press .
1 Press until Main Menu is displayed.
1 Switch the transceiver off then on again to activate the command.
NOTE For help with entering text see page 72, Entering and editing text.
NOTE For help with entering text see page 72, Entering and editing text.
To Next Page
Loading...
Need help?
General
