Operating the transceiver from a computer
414 Manpack Transceiver 2110 series Reference Manual
pagecall Makes a Message call to addressed stations using an ALE/CALM
or a Codan Selcall network
page 430
prompt Controls the settings for the prompt on the command interface page 431
ptt Controls the settings for PTT page 432
scan Controls the settings for scanning in the transceiver page 433
secure Controls the voice encryptor status of the transceiver page 434
selbeacon Makes a Channel Test call to an addressed station using a Codan
Selcall network, or non-alpha address in an ALE/CALM network
page 436
selcall Makes a Selective call to an addressed station using a Codan
Selcall network, or non-alpha address in an ALE/CALM network
page 437
selfid Controls the list of self addresses used in CICS page 438
set Controls the gp settings in CICS page 439
sideband Controls the sideband setting for channels in the transceiver page 440
sound Controls the settings for sounding operations in the transceiver page 441
statusack Sends a response to a Get Status call page 442
statuscall Makes a Get Status call to an addressed station using an
ALE/CALM or a Codan Selcall network
page 443
statustime Sets the length of time a station has to respond to a Get Status call page 444
telcall Makes a Phone call to an addressed station using an ALE/CALM
or a Codan Selcall network
page 445
ver Displays the current version of CICS being used page 445
Table 66: CICS commands and their functions (cont.)
Commands Function See...
To Next Page
Loading...
Need help?
General
