EasyManuals Logo

Codan 2110 series User Manual

Codan 2110 series
521 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #467 background imageLoading...
Page #467 background image
Operating the transceiver from a computer
Manpack Transceiver 2110 series Reference Manual 451
FREQ: xxxxx.x RX/TX The receive and transmit frequencies (in kHz) of the
current channel are the same.
GPS-POSITION: <channel>,
<caller address>, <self
address>, <date> <time>, <gps
position>|NO GPS CONNECTED|NO
VALID GPS POSITION
The GPS position of another station has been received.
LBT: ABORTED The LBT measurement process has been aborted.
LBT: ALL CHANNELS BUSY All of the channels tested for voice and data were busy.
No call was sent.
LBT: DISABLED The global LBT Mode is disabled.
LBT: ENABLED The global LBT Mode is enabled.
LBT: OCCUPIED The channel tested is occupied with traffic.
LBT: VACANT The channel tested is clear of voice and data traffic.
LINK: CLOSED The ALE link between your station and another station
has been closed.
LINK: INCOMING The ALE link between your station and another station is
active, and your station is the recipient.
LINK: OUTGOING The ALE link between your station and another station is
active, and your station is the originator.
LOCK The GP input has been set to lock.
LOCK: ABORT A lock is released from another interface.
LOCK: BUSY The system is locked and cannot be used from this
interface.
LOCK: OFF The system is currently unlocked.
LOCK: ON The system is currently locked.
LQA: <channel>, <remote station
address>, <local BER/SINAD>,
<remote BER/SINAD>, <LQA
score>%
The LQA information from the current or last-established
ALE link since startup of the transceiver has been
requested. The LQA information comprises BER/SINAD
values for the link, and the LQA score. An invalid value
is represented by a hyphen.
LQA-OUTPUT: OFF The asynchronous output of LQA information has been
disabled.
LQA-OUTPUT: ON The asynchronous output of LQA information has been
enabled, that is, LQA output is displayed as it is sent or
received.
MODE: <name>, <sideband>,
<ifwidth>, <ifcentre>
The current mode of the channel.
Table 69: CICS response messages (cont.)
Response message Description

Table of Contents

Other manuals for Codan 2110 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Codan 2110 series and is the answer not in the manual?

Codan 2110 series Specifications

General IconGeneral
BrandCodan
Model2110 series
CategoryTransceiver
LanguageEnglish

Related product manuals