Operating the transceiver
74 Manpack Transceiver 2110 series Reference Manual
1 To enter another letter on the same key, wait until the cursor moves to the next
space...
...then press the key repeatedly until the letter you want is displayed.
1 To enter a letter on another key, press the key for the letter.
You do not need to wait until the cursor moves to the next space.
Changing between alpha and numeric characters
To change between upper-case and lower-case letters and numbers in an editable screen:
1 Press # to change the character/case indicator at the bottom right of the screen from
A to a to #.
Moving the cursor
To move the cursor across the text:
1 Use or to move the cursor left or right respectively.
NOTE
When you are prompted to enter a call address, the types of
characters that you can enter are determined by the call systems
installed in the transceiver.
To Next Page
Loading...
Need help?
General
