A
B
C
D
E
F
G
H
L
M
N
P
section
P 7
951098/1098S - M.Y. 2007 - edition 00
Electric system
During the lap, if the engine reaches one of the two thresholds before the limiter or the limiter itself, the respective warning lights
(10) come on during the display of the saved times.
USB DAQ
This function activates the USB Data Acquisition (DAQ) (Sect. P 10): the DAQ must be connected to the motorcycle wiring.
To activate the DAQ, go into the menu and set the USB DAQ to “On” by holding the button (1) in position B “▼” for 3 seconds.
START and STOP the lap separator by pressing the high beam FLASH button (2) on the left-hand handlebar switch.
If the USB function is active and the display is suddenly switched off (Key-Off), the function is switched off automatically.
10
1
B
2
To Next Page
Loading...
