FOR-A FA-9520 User Manual

169
 White Level
Parameter
Default
Setting range
(Steps)
Description
R, G, B
(RGB White Level)
100.0%
0.0 - 200.0％
(0.5％)
Adjusts the white level of R, G, and B
components separately.
Group Adjust
Off
On
Off
Enables you to adjust white level R, G, and B
components simultaneously, retaining
separately adjusted R, G, and B proportion,
by changing the value of one component.
If AVO Control is set to Auto in the Auto Video Optimizer (AVO) menu (9-2-2), the White Level
setting cannot be changed.
 Black Level
Parameter
Default
Setting range
(Steps)
Description
Red, Green, Blue
(RGB Black Level)
100.0%
0.0 - 200.0％
(0.5％)
Adjusts the black level of R, G, and B
components separately.
Group Adjust
Off
On
Off
Enables you to adjust black level R, G, and B
components simultaneously, retaining
separately adjusted R, G, and B proportion,
by changing the value of one component.
If AVO Control is set to Auto in the Auto Video Optimizer (AVO) menu (9-2-2), the Black Level
setting cannot be changed.
 Gamma Level
Parameter
Default
Setting range
(Steps)
Description
Red, Green, Blue
(RGB Gamma level)
100.0%
0 - 200％
(0.5％)
Adjusts the gamma level of R, G, and B
components separately.
Group Adjust
Off
On
Off
Enables you to adjust gamma level R, G,
and B components simultaneously,
retaining separately adjusted R, G, and B
proportion, by changing the value of one
component.
Curve
(Gamma Curve)
Center
Center
Black
White
Selects a gamma curve type.
If AVO Control is set to Auto in the Auto Video Optimizer (AVO) menu (9-2-2), the all Gamma
Level/Curve settings cannot be changed. Also, if AVO Control is set to Hold, the Curve setting
cannot be changed.
 Sepia
The Sepia Level and Color settings can be changed if Correction Mode is set to Sepia.
Sepia will not be displayed while changing FS1 and FS2 settings simultaneously.
Parameter
Default
Setting range
(Steps)
Description
Level
25.0%
0 - 100％
(0.1％)
Adjusts the color level in SEPIA mode.
Color
-160.0°
--179.8° - 180.0°
(0.2°)
Adjusts the color in SEPIA mode.
If AVO Control is set to Auto or Hold in the Auto Video Optimizer (AVO) menu (9-2-2), the
Sepia settings cannot be changed.
IMPORTANT
Differential or Sepia mode settings under Correction Mode will automatically change
to Balance mode whenever AVO is enabled.
While AVO is being used, the color corrector performs correction as if Correction Mode
is in Balance mode and the gamma curve type is Black curve.
Color correction enabled by setting AVO Control to Hold is also performed in the
above state.

FOR-A FA-9520 Specifications

General

Brand	FOR-A
Model	FA-9520
Category	Signal Processors
Language	English