199
*2 Selectable if Mode is set to 5.1ch.
*3 Under Loudness Channel Assign 2 menus, values are EMB2 CH1 – 6 respectively.
*4 Shown if the FA-95D-D or FA-95DE-E is installed in option slot A/B.
* LFE channels are subjected to adjustments, but not to measurement.
Loudness Standars Setting
ARIB TR-B32
ATSC A85
EBU-R128
ITU R BS.1770
Allows you to select according to what
standard the loudness measurement and
adjustment will be conducted.
Parameter Specification of Standards used in the FA-95ALA
To Next Page
Loading...
