202
FS1, FS2 Video Position
525/60i ±92
625/50 ±92
1080/59i ±240
1080/50i ±240
1080/23PsF ±240
1080/24PsF ±240
720/59p ±160
720/50p ±160
1080/59p ±240
1080/50p ±240 (Pixel)
Adjusts the horizontal/vertical
position of output videos.
525/60i ±30
625/60i ±36
1080/59i ±68
1080/50i ±68
1080/23PsF ±68
1080/24PsF ±68
720/59p ±90
720/50p ±90
1080/59p ±135
1080/50p ±135 (Line)
FS1, FS2 Freeze Settings
Select an operation mode for FREEZE.
Sets the interval to refresh the images by the
number of fields for the field or frame freeze.
(“0” will not refresh the image.)
*1 Changing the FS Mode or Synchro Mode setting while Freeze On/Off is set to On will turn
freeze Off. Freeze On/Off cannot be set to On if Synchro mode is set to Line Sync, or
AVDL. Freeze is always set to Off at startup. These settings are not stored in the event
memory.
*2 Freeze Mode is automatically set to Frame for progressive and progressive segmented
frame input signals and cannot be changed. See the below Freeze Mode Setting Chart for
details.
Freeze Mode Setting Chart
OE: Can be set to Frame, Odd, or Even.
F: Fixed to Frame.
NOE: Can be set to Frame, Odd, or Even, but the image does not appear properly.
NF: Fixed to Frame, and the image does not appear properly.
To Next Page
