EasyManua.ls Logo

FOR-A FA-9520 - Page 228

FOR-A FA-9520
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
228
CONV1/2 S2016-3 Output Status
Displays the status of S2016-3 in Converter 1 and 2 output signals.
Status: Displays Present if ancillary data is inserted. Displays Absent if no ancillary data is
inserted. If ANC Mode under Converter1 Ancillary Setting in the FS1/FS2 Video System
menu (Sec. 9-4-1) is set to H/V ANC, the state of the V ANC setting (Pass or Blank) will be
displayed.
AFD: Displays Active Format Description code in binary format.
AR: Displays the aspect ratio as 4:3 or 16:9 and the inserted AFD type.
Data: Displays the detected 8-byte data in hexadecimal format.
CONV1/2 VI Output Status
Displays the status of RP186 VI in Converters 1 and 2 output signals.
Status: Displays Present if ancillary data is inserted. Displays Absent if no ancillary data is
inserted. If ANC Mode under Converter1 Ancillary Setting in the FS1/FS2 Video System
menu (Sec. 9-4-1) is set to H/V ANC, the state of the V ANC setting (Pass or Blank) will be
displayed.
AFD: Displays Active Format Description code in binary format.
Scan: Displays the Scanning System and the inserted AFD type.
Data1-3: Displays the detected data in hexadecimal format.
CONV1/2 WSS Output Status
Displays the status of BT1119-2 WSS in Converters 1 and 2 output signals.
Status: Displays Present if ancillary data is inserted. Displays Absent if no ancillary data is
inserted. If ANC Mode under Converter1 Ancillary Setting in the FS1/FS2 Video System
menu (Sec. 9-4-1) is set to H/V ANC, the state of the V ANC setting (Pass or Blank) will be
displayed.
AFD: Displays Active Format Description code in hexadecimal format and the AFD type.
Bit 13-0: Displays the inserted Bit13 to Bit0 in hexadecimal format.
CONV1/2 Ancillary Data Packet Output Status
Displays the content, names and inserted lines of the 4 total ancillary data packets inserted
into Converter 1 and 2 output signals.
See section 19. FA-9520 Ancillary Data Packet Name List for details on ancillary data
names, and DID and SDID of formats.
Displays ---- if no ancillary data is inserted.

Table of Contents

Other manuals for FOR-A FA-9520

Related product manuals