248
OID: 1.3.6.1.4.1.20175.1.307.2.4.1. (FS1 COLOR CORRECTION)
0: balance
1: differential
2: sepia
0: center
1: black
2: white
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
-179.8% to 180.0% (Step:0.2%)
OID: 1.3.6.1.4.1.20175.1.307.2.4.1. (FS2 COLOR CORRECTION)
0: balance
1: differential
2: sepia
0: center
1: black
2: white
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
0.0 to 200.0% (Step:0.5%)
-179.8% to 180.0% (Step:0.2%)
OID: 1.3.6.1.4.1.20175.1.307.2.6 (FS1Converter)
0: BY-PASS
1: SD
2: 1080i
3: 720p
4: 1080PsF
5: 1080p(3G)
0: AFD(4:3)
1: AFD-ALT(4:3)
2: AFD(16:9)
3: AFD(16:9)
4: Letterbox 16:9 top
5: Letterbox 14:9 top
6: Letterbox>16:9(4:3)
7: Fullframe 4:3
8: Letterbox 16:9
9: Letterbox 14:9
10: Fullframe 4:3 Alt 14:9
11: Letterbox 16:9 Alt 14:9
12: Letterbox 16:9 Alt 4:3
13: Letterbox>16:9(16:9)
14: Fullframe 16:9
15: Pillarbox 4:3
16: Fullframe 16:9 Protected
17: Pillarbox 14:9
18: Pillarbox 4:3 Alt 14:9
19: Fullframe 16:9 Alt 14:9
20: Fullframe 16:9 alt 4:3
fa952FS1ConverterAspectSD
0: AFD
1: AFD-ALT
2: Letterbox>16:9
3: Fullframe 16:9
4: Pillarbox 4:3
5: Fullframe 16:9 Protected
6: Pillarbox 14:9
7: Pillarbox 4:3 Alt 4:9
8: Fullframe 16:9 Alt 14:9
9: Fullframe 16:9 alt 4:3
fa952FS1ConverterAspectHD
1: Field 2: Frame(Odd 1st) 3:
Frame(Even 1st) 4: Adaptive
fa952FS1ConverterMotionSens
e
fa952FS1ConverterAntiAliasH
fa952FS1ConverterAntiAliasV
OID: 1.3.6.1.4.1.20175.1.307.2.6.60 (FS1ConverterPosition)
Variable (Step:0.2)
Maximum and minimum values
vary depending on the Convert
Mode setting. The current Max
and Min values can be obtained
from fa95Conv1PositionHMax
and fa95Conv1PositionHMin via
Get-command.
fa952FS1ConverterHPosition
Variable
Maximum and minimum values
vary depending on the Convert
Mode setting. The current Max
and Min values can be obtained
from fa95Conv1PositionVMax
and fa95Conv1PositionVMin via
Get-command.
fa952FS1ConverterVPosition