Intel Arria 10 User Manual

Select the appropriate PLL IP for your design. For additional details, refer to the PLLs
and Clock Networks chapter.
To instantiate a PLL IP:
1. Open the Quartus Prime software.
2.
Click Tools ➤ IP Catalog.
3. At the top of the IP Catalog window, select Arria 10 device family
4.
In IP Catalog, under Library ➤ Basic Functions ➤ Clocks, PLLs, and Resets
➤ PLL choose the PLL IP (Arria 10 fPLL, Arria 10 Transceiver ATX PLL, or
Arria 10 Transceiver CMU PLL) you want to include in your design and then
click Add.
5. In the New IP Instance Dialog Box, provide the IP instance name.
6. Select Arria 10 device family.
7. Select the appropriate device and click OK.
The PLL IP GUI window opens.
2. Implementing Protocols in Arria 10 Transceivers
UG-01143 | 2018.06.15
Intel
®
Arria
®
10 Transceiver PHY User Guide
37

Intel Arria 10 Specifications

General

Transceiver Data Rate	Up to 17.4 Gbps
Transceiver Protocols Supported	CPRI, JESD204B
Transceiver Power Consumption	Varies depending on configuration and data rate. Refer to Intel Arria 10 device power estimation tools.
Transceiver Features	Clock data recovery
Power Consumption per Channel	Varies depending on data rate and equalization settings. Refer to Intel Arria 10 device power estimation tools.
Transceiver Type	FPGA integrated transceiver
Operating Temperature Range	-40°C to 100°C (Industrial)
Number of Transceiver Channels	up to 96 full-duplex