Intel Arria 10 User Manual

2.10.3. Custom Simulation Flow
The custom simulation flow allows you to customize the simulation process for more
complex simulation requirements. This flow allows you to control the following aspects
of your design:
• Component binding
• Compilation order
• Run commands
• IP cores
• Simulation library model files
The following figure illustrates the steps for custom flow simulation. If you use a
simulation script, you can automate some of the steps.
2. Implementing Protocols in Arria 10 Transceivers
UG-01143 | 2018.06.15
Intel
®
Arria
®
10 Transceiver PHY User Guide
332

Intel Arria 10 Specifications

General

Transceiver Data Rate	Up to 17.4 Gbps
Transceiver Protocols Supported	CPRI, JESD204B
Transceiver Power Consumption	Varies depending on configuration and data rate. Refer to Intel Arria 10 device power estimation tools.
Transceiver Features	Clock data recovery
Power Consumption per Channel	Varies depending on data rate and equalization settings. Refer to Intel Arria 10 device power estimation tools.
Transceiver Type	FPGA integrated transceiver
Operating Temperature Range	-40°C to 100°C (Industrial)
Number of Transceiver Channels	up to 96 full-duplex