F3 – Setup Menu
Gem-5 User’s Manual 103
F1 – Common Values
The Common Values screen (Figure 51) provides access to operational settings that
affect its operating and display modes, such as the units used for displaying count rate
and activity values on other screens, Gamma body in one-step or two (if configured
for two-step operation).
Figure 51 The Common Values Screen
Line Items
The first three line items, Monitor ID, Location ID, and Serial Number, are
combined and are included in various reports and printouts to identify the unit.
Monitor ID: This is an alphanumeric field that can be used to uniquely identify each
individual monitor. The Monitor ID is also used by the CRemote (see separate
manual) to identify the unit.
Location ID: This alphanumeric field works similarly to the Monitor ID field, above,
to help service personnel locate a monitor requiring service as indicated by the
CRemote.
Serial Number: This alphanumeric field works similarly to the Monitor ID field,
above, to assign a unique serial identification to the unit and should match factory
sticker.
Note: The following characters * \ | : " . < > / and ? cannot be used in the Monitor
ID and Location ID fields because they may be used as folder names by
CRemote.
To Next Page
Loading...
Need help?
General
