Appendix B Operating Files and Directory Structure
300
testhvps.df
The testhvps.df file contains the dwell setting for the HVPS meter test. This
setting is accessed through the F2 – HVPS Meter screen.
testsen.df
The testsen.df file contains the dwell setting for the Sensor Board test. This
setting is accessed through the F6 – Sensor Board Tests screen.
testid.df
The testid.df file contains the dwell setting for the Detector Board ID test. This
setting is accessed through the F10 – Detector Board ID screen.
testcon.df
The testcon.df file contains the dwell setting, test volume, and display settings for
the Carrier Board tests. These settings are accessed through the F11 – Carrier
Board Tests screen.
tst_ohv.df
The tst_ohv.df file contains the settings for the F1 – Optimize Gamma HV screen.
tst_oss.df
The tst_oss.df file contains the settings for the F2 – Optimize Self Shield Factors
screen.
tstaux.df
The tstaux.df file contains settings for the Auxiliary Sensor Board tests. This
setting is accessed through the F3 – Test Auxiliary Sensor Board screen.
tsthbe.df
The tsthbe.df file contains settings for the Barrier Exerciser tests. This setting is
accessed through the F7 – Barrier Exerciser screen.
Additional Test Menu
TST_OSS.DF
The tst_oss.df file contains the settings for the SHIFT+F2, F2 - Optimize Self
Shield Factors screen.
TST_AUX.DF
The tstaux.df file contains settings for the Auxiliary Sensor Board tests. This
setting is accessed through the SHIFT+F2, F3 - Test Auxiliary Sensor Board
screen.
TST_BE.DF
The tsthbe.df file contains settings for the Barrier Exerciser tests. This setting is
accessed through the SHIFT+F2, F7 - Barrier Exerciser screen.
To Next Page
Loading...