History Files
Gem-5 User’s Manual 301
Factory Setup Menu
BADGE.DF
The badge.df file contains the settings for the CTRL + F10, F3 - Badge
Configuration screen.
model.df
The model.df file contains the settings for the F1 – Model Selection screen.
These settings include the Model, Demonstration, Allow Conditional Service,
and Have Program Start Clear All Faults settings.
occupant.df
The occupant.df file contains the settings for the F2 – Operation Configuration
screen.
access.df
The access.df file contains the settings for the F4 –Access Configuration screen.
lvlsetup.df
The lvlsetup.df file contains the settings for the F6 – Access Level Settings
screen.
dosimetr.df
The dosimetr.df file contains the settings for the F7 – Dosimeter Reader
Configuration screen.
database.df
The database.df file contains settings for the F9 – Database Settings screen (for
use with Local Database support like SOFT-LDB etc.).
method.df
The method.df file contains the settings for the CTRL + F10, F10 - Methodology
Configuration.
History Files
Two performance related files are maintained in the D:\MonitorProgram\HISTORY
directory. They are:
mon_hist.df
The Monitor History database (mon_hist.df file) contains a record of the
monitoring events that have occurred over a set time. This database maintains a
summary of overall monitoring results (persons monitored/clean/contaminated,
etc.), as well as a summary of monitoring results for each detector individually.
This data is viewed through the F1 – Monitor History screen, which also permits
clearing the file and starting a new data set. The information can be printed using
the F6 – Printout Menu.
To Next Page
Loading...