Appendix C Special Information
312
F1 – Ready
For the READY screen, “High Count Time” message is one of the Space Key
alternate screen. Last Calibration Time and Carrier board temperature are shown in
lower right status area.
Shift+F1 – Background
Shift+F1 – Background can be used to see effect of F3 – Setup, F11 – Instructions,
Shift+F1 – Background setting changes. When Show Status is set to “Yes” in the
Shift+F1 - Background Instruction screen, the Last Calibration Time and Carrier
board temperature are shown on same line in lower right status area.
F2 – Position
A prompt for “Insert Dosimeter” when Ctrl+F10 – Factory Setup, F7 – Dosimeter
Reader Configuration , Insert Screen is set to “Ready” and dosimeter is removed
during measurement. See F3 – Setup, F11 – Instructions, F2 – Position, Insert
Dosimeter setting. In addition, the High Count Time message is one of the Space
Key alternate screens.
F3 – Count Down
For the Count Down screen, the High Count Time message is one of the Space Key
alternate screens.
F4 – Clean
For the Clean screen, for the LDM61, the Clean Screen displays F3 – Setup, F11 –
Instructions, F4 – Clean, Wait for Read Dosimeter while dosimeter is being read. In
addition, the High Count Time message is one of the Space Key alternate screens.
F5 – Contaminated
For the Contaminated screen, the High Count Time message is one of the Space Key
alternate screens. In addition, An empty variation (no red) can be displayed by the
Display Last Contaminated switch request if there are no previous RESULT…BMP
or PNG files available. See Ctrl+F10 – Factory Setup, F2 – Operation
Configuration, Display Last Contaminated setting. In addition, a “Please Wait”
variation exists. See Ctrl+F10 – Factory Setup, F2 – Operation Configuration,
Resume Contaminated setting (this is also shown when Wait for Read Dosimeter is
shown). In addition, for the LDM61, the Contaminated Screen displays F3 – Setup,
F11 – Instructions, F5 – Contaminated – Wait for Read Dosimeter while dosimeter is
being read.
F6 – Turn
For the Turn screen, the High Count Time message is one of the Space Key alternate
screens.
To Next Page
Loading...
Need help?
General
