F3 – Setup Menu
Gem-5 User’s Manual 187
F4 – Clean Instructions
The fields on this screen are used to inform the occupant being monitored how to
proceed if they are considered “Clean”.
Figure 83 The Clean Instructions Screen.
The following fields are displayed if the Dosimeter Reader Enabled is set to “Yes”
on the Ctrl+F10 Factory Setup, F7 – Dosimeter Reader Configuration screen (on
page 40).
Insert Dosimeter
Wait for Read DosimeterRemove Dosimeter
Read Dosimeter Complete
Read Dosimeter Incomplete
Read Dosimeter Complete
Dosimeter Reader Unavailable
To Next Page
Loading...