Mirion Technologies GEM-5 User Manual

F5 – Information Menu
Gem-5 User’s Manual 239
Figure 110 Monitor History Screen (Page 2)
The screen displays a maximum of 30 detector zones at a time (if applicable). If
necessary, use the Page Up and Page Down keys to scroll up and down the list.
F2 – Service History
The Service History screen, which consists of three pages, provides a service record
of the monitor over a set time. Page 1 provides overall service statistics, including
out-of-service times, Alarm Tests, and Service Menu usage. Page 2 (and 3) provides
a tally of detector faults for each detection zone individually. The ◄ and ► arrow
keys are used to go from Page 1 to Page 2 and Page 3 as appropriate. This
information can also be printed or saved to a text file using the F6
− Printout Menu
(on page 253).
The first page of the Service History screen is shown in Figure 111 on page 240. The
time period covered by the report is “From...” the start date “To...” the current date
and time.
Note: All Faults with a non-zero value are shown even if then fault is not currently
enabled.
This information is kept in D:\Monitor Program\History\SERVE_HIST.DF.

Mirion Technologies GEM-5 Specifications

General

Brand	Mirion Technologies
Model	GEM-5
Category	Monitor
Language	English