Mirion Technologies GEM-5 User Manual

F3 – Setup Menu
Gem-5 User’s Manual 191
F8 – Messages Instructions
The settings on this screen are used to enter the various messages displayed
throughout the operation screens.
Figure 87 The Messages Instructions Screen.
Line Items
Stay Back field is displayed if Approach Sensor during Initialized Background is set
to “Stay Back” on the F3 Setup, F1 – Common Values screen.
High Count Time default is “High Count Time”. It is used on the Initializing
Background and Out of Service screens in place of the previous High Background
setting.
Database Maintenance field is displayed if Database is set to “Enable” on the
Ctrl+F10 – Factory Setup, F9 – Database Settings screen.
File Maintenance: The default is “File Maintenance”. It is shown at bottom of
Background screen when F3 – Setup, F8 – Printout are being processed for
Keep…Days (see F8 - Printout on page 169).

Mirion Technologies GEM-5 Specifications

General

Brand	Mirion Technologies
Model	GEM-5
Category	Monitor
Language	English