Mirion Technologies GEM-5 User Manual

Appendix Q WebRemote
394 Gem-5 User’s Manual
Web Browser Connectivity and Status Monitoring
Mirion Technologies (Canberra CA) Ltd. Contamination Monitors are equipped with
a LAN (local area network) port to add networking capability. This feature permits a
tablet or PC web browser to connect to Mirion Technologies (Canberra CA) Ltd.
Contamination Monitor running WebRemote. WebRemote is a web based user
interface rendered locally or over the network by the web browser. The graphical
user interface is optimized for both touch screen or point and click environment. For
more information, see Installation of WebRemote, Monitor 9.0 (or above) , and
DashBoard on page 399.
A graphic representation of WebRemote commu
nication with a Mirion Technologies
(Canberra CA) Ltd.'s contamination monitors is shown in the figure below:
Figure 161: WebRemote on a Remote Tablet
Note: For WebRemote installation, the prerequisites must be satisfied (see Section
Prerequisites on page 388 for details).
The web browser will give the customer access to an easy to use DashBoard
application. The DashBoard interface is similar to the CRemote. The Dashboard
enables a user friendly interface for status monitoring (in service, contaminated, out
of service, maintenance) of multiple contamination monitors over the LAN or direct
link, via the web browser. The Dashboard is accessible from a tablet or PC web
browser. The user can access the DashBoard without the need of any proprietary
software such as CRemote. For more information, see Dashboard Status Monitoring
and Installation on page 400.

Mirion Technologies GEM-5 Specifications

General

Brand	Mirion Technologies
Model	GEM-5
Category	Monitor
Language	English