Mirion Technologies GEM-5 User Manual

Chapter 6 Diagnostics/Maintenance
232
Table 15 Troubleshooting Guide
Fault Error Possible Causes Fix
Background Update
Timeout
Fault
Door is left open
longer than
“Maximum Time
between Background
Updates”.
• If set in software to
“AUTO” then
closing door will
automatically place
the monitor in
service.
• Ensure nothing is
blocking the door to
prevent it from
closing.
• Check Door Closed
Sensors and cables.
Monitor program does
not start up normally
due to file problems –
Windows message box
appears and pressing
OK closes program
Depends on problem
shown within message
box
• “Read-only”
file/folder
Attribute is
checked.
• Security
permissions not
correct.
• Corrupt file/folder
• Log in as
Administrator and
verify that file/folder
properties have
“Read-only”
unchecked.
• Log in as
Administrator and
verify proper
Security Permissions
for Users are correct
per software
installation
procedures.
• Delete corrupt
file/folder and allow
program to
regenerate.

Mirion Technologies GEM-5 Specifications

General

Brand	Mirion Technologies
Model	GEM-5
Category	Monitor
Language	English