Rohde & Schwarz MXO 4 Series - Page 291

ApplicationsMXO 4 Series
291User Manual 1335.5337.02 ─ 07
Remote command:
METer:BANDwidth on page 701
Measurement time
Sets a measurement time. The time begins in the moment that a measurement is
enabled.
Measurements
Enables the voltmeter measurements. When a measurement is enabled, the voltmeter
is turned on automatically.
"DC"
Enables the DC voltage measurement.
"DC RMS"
Enables the DC RMS voltage measurement.
"AC RMS"
Enables the AC RMS voltage measurement.
Remote command:
METer:DVMeter<m>:ACRMs:ENABle on page 701
METer:DVMeter<m>:ACRMs:RESult? on page 701
METer:DVMeter<m>:DC:ENABle on page 702
METer:DVMeter<m>:DC:RESult? on page 702
METer:DVMeter<m>:DCRMs:ENABle on page 702
METer:DVMeter<m>:DCRMs:RESult? on page 702
All on, All off
Enables/disables all voltmeter measurements.
Digital voltmeter