Rohde & Schwarz MXO 4 Series - Page 702

Remote control commandsMXO 4 Series
702User Manual 1335.5337.02 ─ 07
METer:DVMeter<m>:DC:ENABle <DCResults_St>
Enables the DC voltmeter measurement for the respective channel.
Suffix:
<m>
.
1 to 4, index of the analog channel
Parameters:
<DCResults_St> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Measurements" on page 291
METer:DVMeter<m>:DC:RESult?
Returns the result of the DC voltmeter measurement.
Suffix:
<m>
.
1 to 4, index of the analog channel
Return values:
<Results_DC> Range: -1E+26 to 1E+26
Increment: 0.1
*RST: 0
Default unit: V
Usage: Query only
Asynchronous command
Manual operation: See "Measurements" on page 291
METer:DVMeter<m>:DCRMs:ENABle <DCRMSResults_St>
Enables the DC RMS voltmeter measurement for the respective channel.
Suffix:
<m>
.
1 to 4, index of the analog channel
Parameters:
<DCRMSResults_St> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Measurements" on page 291
METer:DVMeter<m>:DCRMs:RESult?
Returns the result of the DC RMS voltmeter measurement.
Suffix:
<m>
.
1 to 4, index of the analog channel
Applications