Protocol analysisMXO 4 Series
339User Manual 1335.5337.02 ─ 07
SDA source
Sets the source channel to which the data line is connected.
Remote command:
SBUS<sb>:I2C:SDA:SOURce on page 727
SCL source
Selects the source channel to which the clock line is connected.
Remote command:
SBUS<sb>:I2C:SCL:SOURce on page 726
13.3.2.2 Threshold settings
Access: [Apps] key > "Protocol" tab > "I2C" > "Thresholds".
Threshold
Sets the threshold for the SDA and SCL channels. Enter the value directly in the fields.
Additional to the threshold, you can also set a hysteresis.
Remote command:
SBUS<sb>:I2C:SCL:THReshold on page 726
SBUS<sb>:I2C:SDA:THReshold on page 727
SBUS<sb>:I2C:SCL:HYSTeresis on page 726
SBUS<sb>:I2C:SDA:HYSTeresis on page 727
I²C (option R&S
MXO4-K510)
To Next Page
Loading...
