Rohde & Schwarz MXO 4 Series - Page 574

Remote control commandsMXO 4 Series
574User Manual 1335.5337.02 ─ 07
LAYout<ly>:ZOOM<zo>:VERTical:RELative:WIDTh........................................................... 581
LAYout<ly>:ZOOM<zo>:VERTical:RELative:SPAN............................................................ 581
LAYout<ly>:ZOOM<zo>:SSCReen...................................................................................581
LAYout<ly>:ZOOM<zo>[:ENABle] <State>
Enables the zoom.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Parameters:
<State> ON | OFF
Example: See Chapter 17.4.1, "SmartGrid layout with zoom", on page 474.
Usage: Asynchronous command
Manual operation: See "State" on page 178
LAYout<ly>:ZOOM<zo>:COUNt?
Returns the max number of available zooms.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Return values:
<Count>
Usage: Query only
Asynchronous command
LAYout<ly>:ZOOM<zo>:HORizontal:ABSolute:POSition <Center>
Defines the x-value of the centerpoint of the zoom area in absolute values.
Suffix:
<ly>
.
1...4, index of the SmartGrid layout
<zo> 1...4, index of the zoom
Parameters:
<Center> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0
Default unit: Depends on the underlying waveform
Usage: Asynchronous command
Manual operation: See "Position range" on page 179
Waveform analysis