Rohde & Schwarz MXO 4 Series - Page 630

Remote control commandsMXO 4 Series
630User Manual 1335.5337.02 ─ 07
Parameters:
<MidRefLevRel> Range: -100 to 200
Increment: 1
*RST: 50
Default unit: %
Usage: Asynchronous command
Manual operation: See "Upper level, Middle level,Lower level" on page 225
REFLevel<rl>:RELative:MODE <RelativeLevels>
The lower, middle and upper reference levels, defined as percentages of the high sig-
nal level.
Suffix:
<rl>
.
1...4, index of the reference level set
Parameters:
<RelativeLevels> FIVE | TEN | TWENty | USER
FIVE
5/50/95
TEN
10/50/90
TWENty
20/50/80
USER
Set the reference levels to individual values with
REFLevel<rl>:RELative:LOWer, REFLevel<rl>:
RELative:MIDDle, and REFLevel<rl>:RELative:UPPer.
*RST:
TEN
Usage: Asynchronous command
Manual operation: See "Relative levels" on page 225
REFLevel<rl>:RELative:UPPer <UppRefLevRel>
Sets the upper relative reference level if REFLevel<rl>:RELative:MODE is set to
USER.
Suffix:
<rl>
.
1...4, index of the reference level set
Parameters:
<UppRefLevRel> Range: -100 to 200
Increment: 1
*RST: 90
Default unit: %
Usage: Asynchronous command
Automatic measurements