Rohde & Schwarz MXO 4 Series - Page 690

Remote control commandsMXO 4 Series
690User Manual 1335.5337.02 ─ 07
<n> 1...n, index of the harmonics
Return values:
<Harmonic>
Usage: Query only
Asynchronous command
POWer<m>:HARMonics:RESult<n>[:FREQuency]?
Returns the frequency of the n-th harmonic.
Suffix:
<m>
.
1...3, index of the power analysis measurement
<n> 1...n, index of the harmonics
Return values:
<Harmonic>
Usage: Query only
Asynchronous command
POWer<m>:HARMonics:MEASurement:FREQuency[:ACTual]?
Returns the frequency of measured harmonics.
Suffix:
<m>
.
1...3, index of the power analysis measurement
Return values:
<Actual> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Usage: Query only
Asynchronous command
POWer<m>:HARMonics:MEASurement:REALpower[:ACTual]?
Returns the real power. Only available, if POWer<m>:HARMonics:STANdard
on page 686 is set to ENC / END.
Suffix:
<m>
.
1...3, index of the power analysis measurement
Return values:
<Actual> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Usage: Query only
Asynchronous command
Applications