Instrument setup
R&S
®
RTE
135User Manual 1326.1032.02 ─ 20
Desktop (minimize all)
Minimizes all displayed application windows on the instrument, so that the desktop
becomes visible on the screen to access the Windows functionality.
This function is also available from the "File" menu.
Computer name, IP Address, DHCP
Indicates the currently defined computer name, the defined IP address and DHCP
address enabling. These values are required to configure the instrument for work in a
network.
NOTICE! Risk of network problems. All parameters can be edited here; however,
beware that changing the computer name has major effects in a network. For details,
see Chapter 17.2, "Setting up a network (LAN) connection", on page 1027.
Remote command:
DIAGnostic:SERVice:COMPutername on page 1087
System
Opens the standard Windows "System Properties" dialog box to configure system set-
tings. Only users with administrator rights can fulfill this task.
Network
Opens the standard Windows "Network Connections" dialog box to configure a net-
work connection. Only users with administrator rights can fulfill this task.
Screensaver
Opens the standard Windows "Display Properties" dialog box to configure a screen
saver.
Display / Monitors: Display Settings
The "Display / Monitors" button opens the "Display Settings" dialog box, where you can
extend or duplicate the instrument display to a second monitor or projector (external
display).
"Instrument
only"
The instrument display is on, the external display is off.
"Duplicate"
The external display shows the same content as the instrument dis-
play.
System setup
To Next Page
Loading...
